Price: $49.98 – $41.99
(as of Mar 08, 2024 03:03:27 UTC – Details)
Product Description
Features
Shockproof Backup Camera
Solid zinc alloy shellStainless steel fixing partsShockproof, waterproof, dustproofShining, mini size, almost hidden
Using Quality Material
Fisheye lens to get wide view angleGlass lens to filter impuritiesF1.2 aperture to capture more light inputC4 1080P chip to better process the image
Wide View Angle and Good Clearity Image
1080P, best resolution backup camera0.01flux illumination, good night vision effectHorizontal angle is 150 degrees and diagonal angle is 170 degrees
Two Swicher Threads
White Wire: the camera outputs AHD video signal by default, cut it to switch to CVBS video signalGreen Wire: the camera comes with reference line by default, cut it to turn it offNote: After cutting any wire, please reconnect the power supply
Installation Method
Our backup camera must be hanging mounted as the upper part of above picture showsIf you must install like lower part of above picture, our camera will not meet your needNote: Test the camera before final Installation
Wire Connection
Easy wire program and installtionPlease make sure your monitor supports RCA connectionBetter work under stable power supply
Settings for AHD 1080P
All of our 4-pin cameras can’t be connected directly with any other monitors(no matter DVR monitor or dash monitor or whatever)without using our power cable.
Installation Steps:
1. Find a flat surface(parallel to ground) for mounting camera, then secure the nut and bolt in place.
2. Connect the power cable to reversing light power supply.
3. Connect the 20ft extension wire of backup camera to the head unit/other monitors of your car.
4. Start the vehicle and gear on reverse to test the camera.
5. Re-install the head unit/other monitors.
NOTE:
Please test the backup camera before routing video cable from back to front.
If your head unit doesn’t have reversing trigger wire, then no need to use the trigger wires on the video cable.
Some cheap/old Android head units may also have the setting for AHD video signal , but they can’t display any AHD image, because they don’t support AHD at all. If so, then you can only apply CVBS video signal, hope you understand.
Attention:
* Please have a test before final installation.
* If you connect GreenYi backup camera to a FACTORY RADIO, please order a suited Harness & Programmer separately, because different RADIO needs different Harness & Programmer.
* There is a pink color wire on your head unit usually, please connect it with the 20FT video cable’s triggering wire
* If the image on the screen is blurry, flickering or has horizontal/vertical strips, please check all your power and video connections. Try to use a different ground point(iron part) and wrap power and video plugs with electrical tape to insulate from interference. If still the same problem, please order a 12V DC power adapter filter rectifier to solve it, especially needed for Dodge VW AUDI BMW Mercedes Benz vehicles.
* Before you routing, if there is no image on the screen, other than check the camera, please check display setting as well. You can use other device with RCA connector, such as TV to check if the camera works.
Package:
1 * AHD 1080P Backup Camera 1 * Double-shielded 20FT Video Cable 1 * 5FT Power Cable 1 * Stainless Nut 1 * Fixing Metal Circle 1 * Double-sided Tape 1 * User Manual 5 * Zip Ties 5 * Wire Clamps 1 * Thanks Card 2 * T-tap Set(Color by Random) 1 * Removal Tool 1 * Electrical Adhesive Tape
Resolution
1920*1080 / 1280*720 960*720 1280*720 1280*720 1280*720 1280*720
View Angle
170 Degrees / 120 Degrees 170 Degrees 170 Degrees 170 Degrees 170 Degrees 170 Degrees
AHD Video Signal
✓
✓
✓
✓
Guide Line on/off
✓
✓
✓
✓
✓
✓
Dynamic Trajectory Guide Line
✓
Support Front Camera
✓
✓
Hanging Mounted or Sitting Mounted
Hanging Mounted Hanging Mounted Hanging Mounted Hanging Mounted Both Available Both
AHD 1080P Car Backup Camera—1920×1080 pixels resolution rear view camera with AHD video signal which provides more stable video signal transmission, less interference and delay than CVBS video signal cameras. High definition which is better than 99% reverse cameras, 170 degrees viewing angle, no worry about blind spot area, IP68 waterproof, works properly under car washing or bad weather, fantastic night vision effect., 0.01 Lux starlight night vision ensures high clarity image at any time.
Double-shielded Video Cable for AHD Rear View Camera—To ensure best video signal transmission-more stable video signal transmission, less interference and delay, no signal attenuation. Pure copper material, with two detection trigger wires for connection with monitors which with detection wire.
Both AHD and CVBS Video Signal Available, Camera Guideline on / off Adjustable—This rearview camera can work with both AHD(AHD 1080P 25HZ ONLY) and CVBS monitors. Its output video signal is AHD by default, if you need it to connect with a CVBS monitor, please cut the white cable on the camera and reconnect to power supply. AHD video signal image is much clearer than CVBS. It is with guide line by default. If you don’t need it, please cut the green loop and reconnect to power supply.
Easy Installation—Wire connection is very easy as the picture shows, if your monitor has a detection cable, then you will need to connect the trigger wires on the video cable. The reversing camera must be installed hanging mounted as the pictures shows. Note: Test the camera before final Installation.
Mini Shockproof Reversing Camera—The back up camera is very small, its shell is made of high quality zinc alloy, shining, shockproof and stainless.
Leave a Reply